Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterWeld & Rust Repair in Pasadena, CA
Weld and rust repair fixes the structural weak points on your gate before they become a failure that needs automatic gate repair. It typically costs $150 to $450 for most rust remediation and weld reinforcement jobs in Pasadena, and we complete most repairs in one visit. If your gate has rust blooms at the hinges, cracked welds at the frame joints, or corrosion eating through the bottom rail, call us at (626) 657-5425 and we’ll send a written price before any work starts.
Warden Gate Repair Pasadena handles Gate Repair exclusively. We don’t do fences, we don’t do handrails, and we don’t do general metalwork. We weld and restore gates. That narrow focus means we carry the right filler rod, the right rust converter, and the right primer for Southern California’s particular corrosion patterns, and our technicians have seen enough Pasadena gates to know exactly where rust hides first.
When You Need Weld & Rust Repair
Rust is a slow failure, and welds crack under fatigue. Here’s what we see in Pasadena most often, listed by how urgent it is:
- Rust at the bottom rail or hinge plates. Irrigation overspray and soil contact keep the bottom of a gate damp for hours. On gates in the Linda Vista and San Rafael neighborhoods, we regularly find pinholes in the bottom rail that haven’t punched through yet but will within a season or two.
- Cracked welds at the stile-to-rail joints. Every open-and-close cycle flexes the frame. A hairline crack at a corner joint grows with each cycle until the weld lets go and the gate sags or drops.
- Rust bloom around the gate motor bracket. When the bracket that holds a LiftMaster or FAAC opener corrodes, vibration from the motor accelerates the damage. The fix is usually cutting out the bad section and welding in a new plate.
- Flaking paint with orange streaks beneath it. That’s active rust traveling under the coating. By the time you see staining, the metal underneath has usually lost significant thickness.
- A gate that sags on the hinge side. This often looks like a hinge problem but is actually the hinge plate losing its weld or the post face rusting out behind the plate.
- Pinholes or cracks anywhere on a steel tube frame. These let water inside, and water inside a tube rusts from the inside out. A gate can look fine on the outside and be paper-thin within.
If you’re seeing any of these, it’s cheaper to call now than after the gate falls off its hinges. Gate repair in Pasadena is always more expensive when it becomes an emergency.
Our Weld & Rust Repair Process
We work from a set process so you know what’s happening at every step. Here’s how a typical weld and rust repair goes with Warden Gate Repair Pasadena:
- You call and describe what you’re seeing. A live person answers, 24/7. We’re not routing you to a call center, and there’s no chatbot between you and a human. We’ll ask for photos if you have them.
- We assess the damage on site. We grind back a small section to see how deep the rust goes, because a clean surface can hide significant wall loss. We check the weld integrity at every joint, not just the one that’s visibly failing.
- You get a written price before any work begins. Not a range, not an estimate that can change. A written price for the exact repair we’ll do. If new damage is discovered mid-repair, we stop and show you before proceeding.
- We cut out, grind, and weld. Rusted sections are removed back to sound metal. New steel is fit, welded, and dressed. We weld with the correct filler for the base metal, whether that’s mild steel or a higher-carbon alloy.
- We treat the metal and seal it. We apply rust converter to any remaining surface oxidation, then prime and seal. The goal is a repair that doesn’t just look clean for a month but stays solid for years.
- We test the gate through full open-and-close cycles. If the gate swings, we check for bind and sag. If it slides, we check the track and the motor. The 365-Day Done Right Promise covers the work, and if it isn’t right, the return visit is free.
Weld & Rust Repair Pricing in Pasadena
We write a price for every job before we put a grinder to the metal. Here are honest ranges for the weld and rust repairs we do most often in Pasadena:
- Spot rust removal and re-coat (small area, one rail section): $150 – $250
- Cut out and replace a rusted bottom rail section (up to 24 inches): $250 – $450
- Weld repair at one frame joint: $180 – $300
- Gate motor bracket replacement with welding: $200 – $400
- Full frame reinforcement (multiple joints, steel plate gussets): $400 – $800
What moves the price is three things: how much metal needs to come out, how thick the remaining steel is, and whether the gate needs gate realignment and has to be lifted off its hinges or can be repaired in place. Work on heavier ornamental steel gates on properties in the Arroyo Seco corridor tends to run higher simply because the material is thicker and the gate is heavier.
Every repair includes a written price before work starts, a written guarantee, and the 365-Day Done Right Promise. If the repair fails within a year, the return visit is free. Call (626) 657-5425 and we’ll schedule an assessment. The estimate is free.
FAQs – Weld & Rust Repair
How much does weld and rust repair cost in Pasadena?
Most weld and rust repair jobs in Pasadena run between $150 and $450-see our full breakdown of how much gate repair costs in Pasadena. Small spot treatments on a single rail section start around $150 to $250, while cutting out and replacing a rusted bottom rail section typically runs $250 to $450. Full frame reinforcement on a large ornamental gate can reach $800. Call (626) 657-5425 for an exact written quote, free of charge.
Can you fix a rusted gate without replacing it?
Yes, if the rust hasn’t consumed more than about 30 percent of the metal thickness. We grind back to sound steel, cut out the bad section, weld in a patch or new section, treat the remaining surface rust, and re-season with primer and paint. If the frame is rusted through in multiple places, replacement becomes cheaper than repair, and we’ll tell you that directly rather than sell you a patch job. Call (626) 657-5425 and we’ll assess it honestly.
How long does weld and rust repair last?
A proper weld repair on a gate frame that’s had the rust cut out should last 10 years or more if the gate is maintained and recoated every few years. The welds themselves are typically the strongest part of the repair. What kills gates in Pasadena is sprinkler overspray and soil contact, so we’ll point out any landscape issues keeping the gate damp and tell you what to adjust so the repair holds. Every repair is covered by our 365-Day Done Right Promise, and if it fails, the return visit is free.
Is it cheaper to repair or replace a rusted gate?
Repair is usually cheaper when the damage is localized to a bottom rail, a hinge plate, or a few frame joints. Replacement wins when rust has eaten through multiple structural points or the frame has lost enough wall thickness that you’d be welding patch on patch. In Pasadena, a typical repair runs $150 to $450, while a new steel gate often starts around $1,200 to $2,500 installed. We’ll show you the numbers for both options before you commit to either. Call (626) 657-5425.
Why Warden Gate Repair Pasadena
A warden is trusted to watch over a place and keep it secure. That’s the whole idea behind a gate, and it’s the standard we hold ourselves to when we work on yours.
We’ve been doing this since 2008 as part of the Threshold Group family, and every technician who comes to your door has passed the full Threshold Standard: background-checked, identity-verified, photo-badged, and sent to you by name and photo before arrival. When the tech shows up, their ID badge matches the photo we sent you. No anonymous technician, no surprise knock on the door.
We are factory-trained across LiftMaster, FAAC, BFT, and Linear gate systems, along with the rest of the major brands we service. The right parts and the right knowledge arrive together, which means fewer return trips and repairs that hold.
And we answer the phone. 24/7, a live person picks up, because a gate that won’t close is a security problem, and security problems don’t keep business hours. Whether you need home gate service or a full gate repair in Pasadena, the number is the same: (626) 657-5425.
Get Your Weld & Rust Repair Price
If your gate has rust, a cracked weld, or a sag that’s getting worse, call us at (626) 657-5425. We’ll set an assessment, give you a written price before any work starts, and stand behind it with the 365-Day Done Right Promise. Free estimates, every time.
Written by Cole Rafferty, Owner at Warden Gate Repair Pasadena, serving Pasadena.