Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Tujunga, CA
Warden Gate Repair handles gate repair, electric gate repair, and gate motor repair across Tujunga, CA. Homes here sit on hillside lots with steep driveways, which means gates work harder than they do on flat ground. Sun damage, Santa Ana wind gusts, and eroded post footings create a specific set of problems we see on nearly every Tujunga visit. If your gate is sagging, grinding, or refusing to open, call (626) 657-5425 and a real person will answer, day or night.
Why Tujunga Homes Are Different
Tujunga’s housing stock is mostly single-family homes built into the San Gabriel foothills. The lots slope. Many driveways climb 10 or 20 feet from the street to the garage, which puts a lot of weight on the gate’s hinges and the post that holds it. A gate that would work fine on a flat Sunland lot will lean out of square here within a year or two if the posts were not set deep enough.
The sun is the other big factor. South-facing slopes get hammered every afternoon. Wood gates warp and crack. Powder-coated iron fades. Inside the opener, plastic gears get brittle faster than the manufacturer’s wear schedule accounts for, especially on LiftMaster and FAAC units that get direct afternoon exposure. Then the Santa Anas come through in the fall and push a heavy gate hard against its hinges. The wind does not usually break the gate. It finds the weak point that the sun already started and finishes the job.
For Tujunga specifically, we check two things on every visit: whether the gate posts are anchored in concrete deep enough for a hillside, and whether the opener’s internal gears show heat fatigue. Both are cheap to fix early and expensive to ignore.
Styles & brands we work with
Our Main Tujunga Services
Most Tujunga homeowners call us for one of three reasons: a gate that will not open, a gate that will not stay closed, or an opener making noise but not moving the gate. Each of those has its own page with specific pricing and a deeper breakdown of the repair.
Gate Repair in Tujunga
A Tujunga gate repair usually involves re-setting a post, replacing a sagging hinge, or re-welding a cracked iron joint. On hillside lots, the first thing we do is check whether the post has shifted in its footing. If it has, the fix starts below ground, not at the hinge. We carry welding gear, replacement hinges, and post anchors on the truck, so most Gate Repair in Tujunga work is completed in one visit.
Electric Gate Repair in Tujunga
When the gate swings or slides on its own but something is off, that is an electric gate problem. Tujunga’s heat dries out wiring insulation faster than you would expect, and older installs often have connections that were never rated for full sun. We trace the circuit, replace what is failing, and leave you with a Electric Gate Repair in Tujunga that works without tripping a breaker every other week.
Gate Motor Repair in Tujunga
The gate motor is the box that slides or swings your gate automatically. On Tujunga hillsides, motors burn out earlier than the spec sheet says because they fight gravity on every cycle. If your gate motor hums, clicks, or moves a few inches and stops, we can usually Gate Motor Repair in Tujunga the same day with parts from the truck, including LiftMaster, FAAC, BFT, and Linear replacements.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Tujunga
Our Tujunga trucks are stocked for LiftMaster, FAAC, BFT, and Linear repairs. We carry the common gears, control boards, and remotes locally so the second visit is the rare one, not the rule. See our brands for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Tujunga, CA
| Service | Typical range in Tujunga |
|---|---|
| Gate hinge replacement or re-weld | $180 – $340 |
| Gate post reset or deep anchor | $350 – $700 |
| Wood gate warp correction | $220 – $450 |
| Iron gate re-welding (cracked frame) | $250 – $600 |
| Electric gate wiring repair | $160 – $320 |
| Gate opener gear replacement | $200 – $400 |
| Gate motor replacement (small swing) | $600 – $1,100 |
| Gate motor replacement (large slide) | $1,200 – $2,400 |
| Gate opener control board replacement | $280 – $520 |
| Gate remote or keypad programming | $75 – $150 |
Hillside work pushes the higher end of those ranges when the post needs to go deeper or the gate is unusually heavy. You will have the written price in hand before any work begins, every time, no exceptions.
Neighborhoods We Serve in Tujunga
We cover all of Tujunga, including the hill streets up above Foothill Boulevard and the flatter blocks down toward Sunland. Typical response time for a gate emergency in Tujunga is under two hours when you call before noon.
- Mount Gleason area
- Hillhaven
- Stonehurst
- Upper Tujunga Canyon
- Plainview
Service Area – Cities Near Tujunga
Warden Gate Repair serves all of the San Gabriel foothill communities and surrounding cities. If you are just outside Tujunga, we also handle gate work in Glendale, CA, Altadena, CA, Pasadena, CA, and Alhambra, CA. Dispatch is coordinated from the brand’s Los Angeles office, with crews serving Tujunga locally.
Serving Tujunga, CA - Our Local Coverage Area
We’re based in the Tujunga area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Tujunga
For emergencies, most Tujunga calls get a technician on site within two hours when you call before noon. Afternoon and evening calls may go to the next available slot that day. You always speak to a live person, never a voicemail.
Repairs and replacements on existing posts typically do not require a City of Los Angeles permit. If you are adding a new gate where a new post goes in or moving the gate line, your hillside property may need a grading check. We will tell you straight what likely applies and what does not.
Yes. The technician assigned to your job is the one who arrives, and you will have their name and photo before they get there. They show a photo ID badge at the door, every time. That is the Threshold Standard, and we do not waive it for any visit.
Call Warden Gate Repair at (626) 657-5425 for a free estimate on any gate repair in Tujunga, CA. You will get a live person, a written price, and the name and photo of the technician before they ever knock on your door.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tujunga Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.