Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with





See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in Pasadena, CA
Automatic gate repair in Pasadena typically costs $185 – $520 for common issues like misaligned safety sensors, worn gate hinges, and control-board failures, with most repairs finished the same day. If your gate won’t open, stops halfway, or makes a grinding noise when it moves, the problem is usually the gate motor (the box that slides or swings your gate automatically), the safety sensors, or the track it rides on. At Warden Gate Repair Pasadena, we fix all of it, and you’ll know exactly who’s coming to your door before we arrive. Call us at (626) 657-5425 for a free estimate.
We work exclusively on gates. That’s it. No general handyman jobs, no unrelated repairs. If you’ve got an automatic gate in Pasadena that’s acting up, this is what we do every day. For a broader look at the work we handle, see our Gate Repair in Pasadena page.
When You Need Automatic Gate Repair
Automatic gates don’t usually fail without warning. They give you signs. Here’s what we hear from Pasadena homeowners on a typical week, from the Hastings Ranch hillsides to the flat streets of Bungalow Heaven:
- The gate opens halfway and stops. This often points to a failing limit switch or an obstruction the safety sensors keep tripping. We see this frequently on older LiftMaster and FAAC openers in Pasadena when the internal logic board starts to wear.
- The safety sensors keep reversing the gate. If your gate starts closing, then jerks back open, the photo-eye sensors are likely misaligned or failing. This is a safety feature that should never be disabled, and it’s a fast repair when caught early.
- The gate makes a grinding or clunking sound. In Pasadena’s dry summer months, gate wheels and hinges collect dust and grit, which accelerates wear on the motor. A grinding noise usually means the gearbox or drive chain needs attention before it seizes.
- The keypad or remote stops responding. Sometimes it’s a dead battery. Sometimes the receiver board inside the opener has failed. We test both before quoting anything.
- The gate sags or scrapes the ground. Over time, the weight of the gate settles and the hinges wear unevenly. This puts strain on the automatic opener and shortens its life. Often the fix is mechanical, not electrical.
Our Automatic Gate Repair Process
You won’t be surprised by who shows up or what you’ll pay. Here’s how it works:
- You call (626) 657-5425 and talk to a real person. No voicemail, no chatbot. We answer live, 24 hours a day, every day of the year. You describe the problem; we help you figure out if it’s urgent.
- We schedule your visit and send you the technician’s name and photo. Before our tech heads to your Pasadena home, you’ll see exactly who’s coming. Every Warden tech meets the Threshold Standard: background-checked, identity-verified, and photo-badged. When they arrive, they’ll show that photo ID at your door before anything else happens.
- The tech diagnoses the problem on-site. We inspect the gate motor, track, hinges, sensors, and control board. We explain what we found in plain language, show you the worn or failed part when possible, and then hand you a written price before any work starts.
- You approve the repair, and we do the work. No surprise line items at the end. The number you approved is the number you pay.
- We test the gate through a full open-close cycle. Before we leave, the gate gets tested with the safety sensors, keypads, and remotes. If anything still isn’t right, we keep working until it is.
The 365-Day Done Right Promise backs every repair we make. If the fix doesn’t hold, we come back and make it right at no charge. It’s in writing, every time.
Automatic Gate Repair Pricing in Pasadena
Here’s what you can expect to pay for common automatic gate repairs in Pasadena:
- Safety sensor alignment or replacement: $120 – $260
- Limit switch adjustment/replacement: $140 – $320
- Control board diagnosis and replacement: $260 – $480
- Gate hinge replacement (pair): $180 – $390
- Gearbox or drive-chain service: $210 – $430
- Keypad or remote receiver repair: $95 – $220
What moves the price: the age of the gate, the brand of opener (we service LiftMaster, FAAC, BFT, and Linear, among others), whether parts need to be ordered or are already on our truck, and how involved the mechanical work is. An older FAAC swing-arm opener with a failing gearbox will cost more than a simple photo-eye realignment on a LiftMaster slide gate.
Every estimate is free. You’ll know the written price before we touch a bolt, and if you decide not to proceed, there’s no charge for the visit. Call (626) 657-5425 to schedule a diagnostic.
FAQs – Automatic Gate Repair
How much does automatic gate repair cost in Pasadena?
Most automatic gate repairs in Pasadena run between $185 and $520, depending on the failed part and the opener brand. A simple sensor realignment may cost under $200, while a control board replacement can approach $500. Warden Gate Repair gives you a written price before any work starts, so there’s no guessing. Call (626) 657-5425 for a free estimate tailored to your gate.
Can you fix an automatic gate the same day?
Yes. Most automatic gate repairs we handle in Pasadena are completed the same day, often in one visit. Some jobs require ordering a specific part for a LiftMaster, FAAC, BFT, or Linear opener, and in those cases we’ll tell you the timeline before you commit to anything. Call us and we’ll let you know what’s realistic for your specific gate.
Is it cheaper to repair or replace an automatic gate opener?
For most openers under 10 years old, repair is significantly cheaper than replacement. A new gate motor typically costs $800 – $1,800 or more depending on brand and gate size, while most repairs stay under $500. When a motor is beyond repair, we’ll show you the worn parts and explain why replacement makes more sense before you spend a dollar. Call (626) 657-5425 and we’ll help you make an honest call.
Do you service all automatic gate brands?
We’re factory-trained on nine major gate and opener brands, including LiftMaster, FAAC, BFT, and Linear. If your Pasadena gate runs on one of these systems, we carry or can quickly source the right parts. If your opener is from a brand outside our training, we’ll tell you up front rather than experiment on your gate. Call (626) 657-5425 and tell us what you have.
Is a malfunctioning automatic gate a safety risk?
A gate that moves unpredictably can pinch fingers, strike a car, or trap a pet, so we treat every repair as a safety job, not a convenience call. If your gate hesitates, reverses unexpectedly, or keeps moving when it should stop, keep people and pets clear of it and call us. We’ll send a background-checked, photo-badged technician to your Pasadena home, and you’ll know exactly who’s coming before they arrive. Call (626) 657-5425 any time.
Why Pasadena Homeowners Call Warden for Automatic Gate Repair
A warden is someone trusted to watch over a place and keep it secure. That’s the whole idea behind a gate and it’s the standard we hold ourselves to. When we knock on your door in Pasadena, you’ve already seen our technician’s name and photo. They’ll show you an ID badge before stepping inside your property. That’s the Threshold Standard, and it’s non-negotiable on every visit.
We’ve been doing gate-specific work since 2008 as part of the Threshold Group family. We don’t do general repairs or side jobs. We answer the phone live, at any hour, 365 days a year. And when we give you a price, it’s in writing, before we do anything else. No exceptions, no fine print.
Written by Cole Rafferty, Owner at Warden Gate Repair Pasadena, serving Pasadena.
For gate repairs beyond automatic systems, see our Gate Repair page. Ready to get your gate moving again? Call (626) 657-5425 for a free estimate from a technician whose name and photo you’ll know before we arrive.