Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Maywood, CA
Gate repair in Maywood almost always comes down to two things: how tight the lot is, and how old the gate is. Most of Maywood’s homes were built between the 1920s and 1950s, and the gates that front them have often survived decades of sun, rain, and root growth. That means post shifting, hinge sag, and rusted hardware are the calls we get most. If your gate no longer swings, slides, or latches the way it should, call (626) 657-5425 and we’ll send a technician whose name and photo you’ll have before they arrive.
Why Maywood Homes Are Different
Maywood’s dense grid of 1920s – 1950s bungalows and duplexes on narrow lots means most gates are compact, street-facing, and highly visible. A gate that leans or drags isn’t hidden behind a long driveway. Neighbors see it, mail carriers push against it, and kids test it on the way to school. Repairs here often hinge on matching period details and meeting strict setback rules in a city where every foot of frontage counts.
The original wrought iron and chain-link gates across Maywood have been modified for decades, so we rarely see uniform post spacing or matching hardware. A gate that was rehung once in the 1980s and again in the early 2000s carries layers of fixes. Add in the camphor trees lining streets like 55th and 58th and you get root growth that slowly shoves gate posts out of line. Mild, dry summers let metal expand, and winter rains bring rust at the welds. Irrigation overspray from small front yards accelerates corrosion right at the base, where posts meet concrete.
Every one of these conditions changes the repair. We measure what exists before we quote anything.
Styles & brands we work with





Our Main Maywood Services
Maywood homeowners call us most often for two things: a gate that won’t close securely, and an electric opener that has quit responding. Each has its own Maywood page below.
Gate Repair in Maywood
Most Gate Repair in Maywood calls start with a gate that has dropped on the hinge side and scrapes the concrete. On Maywood’s narrow lots, that scrape happens a few inches from the front step, so it’s loud and impossible to ignore. We realign the posts, replace the hinges, and re-latch the gate so it closes flush again. Where roots from parkway camphor trees have shifted a post, we reset it in fresh concrete rather than bending the gate to fit the drift.

Electric Gate Repair in Maywood
Electric gate systems in Maywood are often retrofits on old chain-link or wrought iron frames, so the wiring and the mechanical gate rarely match cleanly. Electric Gate Repair in Maywood typically means tracing a short in the control wiring, replacing a safety edge, or recalibrating a limit switch that has drifted. We work on LiftMaster, FAAC, BFT, and Linear openers, which covers most of what Maywood homes have installed.

Gate Motor Repair in Maywood
When the gate motor (the box that slides or swings your gate automatically) fails, it usually hums without moving or stays dead silent. Gate Motor Repair in Maywood is diagnostics-first: we test the capacitor, the limit switches, and the board before recommending a repair or replacement. On Maywood’s short driveways, a motor that half-opens the gate blocks the sidewalk, so we treat this as a same-visit priority whenever parts are on the truck.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Maywood
We service LiftMaster, FAAC, BFT, and Linear equipment across Maywood, and we keep common boards, remotes, and safety edges stocked nearby so most repairs don’t stretch into a second visit. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Maywood, CA
| Service | Typical range in Maywood |
|---|---|
| Service call and diagnosis | $89 – $149 |
| Gate hinge replacement (each) | $85 – $165 |
| Wrought iron gate realignment | $180 – $340 |
| Chain-link gate post reset | $220 – $425 |
| Gate latch and lock replacement | $95 – $190 |
| Weld repair (rust crack, 1 – 3 spots) | $140 – $280 |
| Gate motor replacement (residential) | $450 – $950 |
| Control board replacement | $220 – $410 |
| Safety edge replacement | $160 – $310 |
| Full gate opener install (motor, rails, safety) | $1,200 – $2,800 |
Prices in Maywood move most on post condition. A post that needs digging out and re-setting in concrete adds labor that a simple hinge swap doesn’t. Root-damaged posts on streets like 55th and 58th are the most common reason a quote lands at the higher end. Whatever the number, you get it in writing before any work starts, and that number doesn’t change at the end.
Neighborhoods We Serve in Maywood
We cover all of Maywood, from the streets around Maywood City Hall to the residential blocks near the 710 and 5 freeway corridors. Typical response time for most Maywood calls is same-day or next-morning, depending on when you call.
- Central Maywood near Slauson and Atlantic
- The 55th and 58th Street corridor
- Streets around Maywood City Hall
- Blocks near Maywood Park and Pine Avenue
- The residential grid south of Randolph Street
Service Area – Cities Near Maywood
We also serve the communities around Maywood regularly: Montebello, CA to the east, Monterey Park, CA to the north, Pico Rivera, CA to the southeast, and Alhambra, CA to the north of Monterey Park. Dispatch runs from our Los Angeles office, and the technicians who arrive at your Maywood gate know the local conditions before they pull up.
Serving Maywood, CA - Our Local Coverage Area
We’re based in the Maywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Maywood
Most Maywood calls are answered live the moment you call, and we can typically schedule a visit for the same day or the following morning. Emergency calls where a gate is stuck open or won’t secure are prioritized because a gate that won’t close is a security problem, not an inconvenience.
Most repairs on existing gates don’t need a permit in Maywood. If you’re replacing a gate or post and changing the footprint or height, the city’s setback rules can come into play on these narrow lots. We’ll tell you before work starts if your job looks like it touches the permit line.
The price we give you before any work starts covers the labor, the parts we’re installing, and the cleanup. There are no surprise line items at the end. If the repair fails inside a year, the 365-Day Done Right Promise means we return and fix it free.
If your gate in Maywood won’t close, won’t open, or won’t stay on its posts, call (626) 657-5425. We’ll send a technician you’ll know by name before they knock.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Maywood Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.