Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Pasadena, CA
Hinge and post repair fixes the two points where your gate attaches to the rest of your property: the hinges that let the gate swing and the post that holds the whole thing up. When either fails, the gate sags, drags, binds, or won’t latch, and forcing it only makes the damage worse. At Warden Gate Repair Pasadena, we repair and replace hinges and posts on swing gates across Pasadena, and we give you a written price before any work begins. Call (626) 657-5425 for a free estimate, or read on to learn how our Gate Repair process handles hinge and post failures.
Key Takeaways
- Hinge and post repair in Pasadena typically costs $265 – $680 for hinge work and $480 – $1,400 for post replacement, depending on materials and site conditions.
- Most hinge replacements take 1 – 2 hours; post replacement can take a half day or more when concrete work is involved.
- Every repair comes with a written price before work starts, a written guarantee, and our 365-Day Done Right Promise: if the repair fails, we come back free.
- We service hinges and posts on gates fitted with LiftMaster, FAAC, BFT, and Linear openers, so the mechanical and structural sides are handled together.
When You Need Hinge & Post Repair
A gate that does not swing smoothly is trying to tell you something. Most of the time it is one of three things: a hinge that has worn or pulled loose, a post that has shifted out of alignment, or a gate that was never hung properly in the first place. Here is what we see on service calls throughout Pasadena, from the Arroyo to Hastings Ranch:
- The gate drags or scrapes the ground near the latch side. This usually means the top hinge is loose or the post has leaned. In older Pasadena neighborhoods with decomposed granite soil, post lean happens gradually after heavy rain cycles.
- The gate sags visibly when open, but you can lift it back into place. A worn hinge pin or an egged-out hinge barrel is the likely cause. Lifting it works for a while, but the slop gets worse every time the gate cycles.
- The hinge has pulled screws out of the post or the gate frame. Once the screw holes are stripped, tightening them again does not hold. The fix is an oversized fastener, a through-bolt, or a new hinge leaf mounted in a fresh location.
- The post wobbles when you push against it. A gate post should not move, period. If it does, the base is compromised below the soil line, and no hinge repair will last until the post is stabilized.
- The gate hits the strike plate too high or too low to latch. Hinge wear changes the gate’s resting angle. Adjusting the latch is a bandage; repairing the hinge is the cure.
- Rust has flaked the hinge barrel or leaf. Coastal moisture and irrigation overspray both reach Pasadena gates. Once a hinge barrel splits from internal corrosion, the gate can drop suddenly and without warning.
Our Hinge & Post Repair Process
We send one technician who does the whole job from diagnosis to final swing test, and you know who is coming before they arrive. Here is how it works:
- Call and book. You call (626) 657-5425 and speak to a live person. We ask what the gate is doing, what type of opener it has if any, and when you are available. No call center menus, no chatbots.
- You receive the technician’s name and photo before the visit. This is our Threshold Standard. Every technician is background-checked, identity-verified, and photo-badged. You will know exactly who is at your gate before you open the door.
- On-site diagnosis and written price. The technician inspects the hinge, the post, the surrounding concrete, and the opener’s attachment points. You get a written price before any work begins. No surprise line items, no “while I’m here” add-ons.
- The repair. Depending on what we find, this may mean replacing hinge leaves and pins, through-bolting loose hinges, re-setting a post in concrete, or welding and reinforcing a steel post. We carry common hinge sizes and steel stock on the truck, so most hinge repairs finish the same visit.
- Opener re-alignment. After the structural work, we cycle the opener several times to confirm the travel limits and safety eyes still work correctly. If your gate has a LiftMaster, FAAC, BFT, or Linear opener, we adjust it to match the repaired gate geometry.
- You sign off and get your guarantee in writing. Every hinge and post repair is covered by the 365-Day Done Right Promise. If the repair is not right, we make it right, and the return visit is free.
Hinge & Post Repair Pricing in Pasadena
Hinge and post repairs vary because a worn hinge pin is a fifteen-minute fix, while a rotted post set in concrete is a half-day structural job. The ranges below reflect what we have billed on Pasadena jobs over the past several years:
| Repair Type | Typical Cost Range | Notes |
|---|---|---|
| Hinge adjustment or single hinge pin replacement | $145 – $265 | 45 – 90 minutes; works when hinge leaves are still solid |
| Full hinge replacement (both hinges, standard steel or galvanized) | $265 – $480 | Includes rehanging the gate and adjusting the latch |
| Hinge replacement plus strip-and-reinforce gate frame | $480 – $680 | When the gate frame is damaged where old hinges were mounted |
| Post stabilization (bracket, wedge, or epoxy set) | $300 – $600 | When the post footing is intact but the post has shifted |
| Post replacement (steel or pressure-treated wood, set in concrete) | $480 – $1,400 | Includes demo of the old post, new concrete footing, and rehanging the gate |
What moves the price? Three things, mostly. First, the condition of the post: a steel post with a solid concrete footing is a bracket-and-tighten job, while a wood post rotted below grade means excavation and a new pour. Second, the gate size and weight: a heavy iron driveway gate puts far more load on its hinges than a 40-pound pedestrian gate, so the hardware has to be sized accordingly. Third, the opener: if the gate’s geometry changes, the automatic gate repair work on limits and safety sensors has to be re-set, which adds a small amount of labor. We give you the written price before the work begins, so none of this is a surprise.
For a more complete look at gate repair costs in the area, see our Gate Repair in Pasadena page.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Pasadena?
Hinge and post repair in Pasadena typically costs between $265 and $680 for hinge replacement and $480 to $1,400 for post replacement, with most jobs landing near the middle of those ranges. A simple hinge pin replacement can run as low as $145. Call (626) 657-5425 for an exact quote; estimates are free.
Can you repair a sagging gate without replacing the post?
Often yes; if the post is still solid in its footing, we can replace the hinges, through-bolt loose connections, and rehang the gate to fix the sag without touching the post. If the post itself is leaning or rotted, hinge work alone will not hold. We will tell you the truth either way and give you a written price before starting.
Can you come today for a hinge repair in Pasadena?
In most cases we can schedule you within 24 to 48 hours, and our phone line is answered by a live person 24/7, so you can ask about availability right now. If your gate will not open or close at all, tell us when you call, and we will treat it as urgent. Call (626) 657-5425 to check today’s schedule.
Is it cheaper to repair hinges or replace the gate?
Repairing hinges is almost always cheaper, typically $265 to $680, versus $2,500 to $9,000 or more for a full gate replacement. Unless the gate frame itself needs weld & rust repair or is bent, new hinges and a solid post give the existing gate years more service. We will show you the numbers for both options and let you decide.
Do you work on gates with LiftMaster or FAAC openers?
Yes; we service hinge and post repairs on gates with LiftMaster, FAAC, BFT, and Linear openers, and we re-set travel limits and safety sensors after the structural work is done. If your opener uses a different brand, call us and we will tell you honestly whether we can help.
Why Pasadena Homeowners Choose Warden for Hinge & Post Work
A gate that will not close is a gate that cannot do its job. That is why we move quickly on hinge and post repairs, including lock repair when needed, and why we built our company around the two things that make people hesitate to call a repair service: not knowing who is coming to their door and not knowing what the job will cost.
We started in 2008 as part of the Threshold Group family, doing one thing: gate repair. Not fences, not general contracting, not “we also do gates.” The name Warden is deliberate. A warden is someone trusted to watch over a place and keep it secure; that is the whole idea behind a gate and the whole idea behind our work.
Every technician arrives under the Threshold Standard: background-checked, identity-verified, photo-badged, and introduced to you by name and photo before the visit. When they knock, you will already know who they are. And before any hinge or post work starts, you will have the written price in your hand. That is our non-negotiable, regardless of job size.
If the repair fails within a year, the 365-Day Done Right Promise means we return and make it right at no charge. That is what we mean by a guarantee in writing, not a verbal assurance.
For hinge and post repair in Pasadena, from Linda Vista to San Rafael, call (626) 657-5425 for a free estimate. A live person answers, day or night.
Written by Cole Rafferty, Owner at Warden Gate Repair Pasadena, serving Pasadena.