Sliding driveway gates
Wrought iron
Wood & steel frame
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterDriveway Gate in Pasadena, CA
Driveway gate installation in Pasadena typically costs $4,800 to $14,500 for a complete single swing gate system, with most Pasadena homes falling between $6,500 and $9,500 depending on gate size, material, and whether you need a new gate motor. Warden Gate Repair installs, upgrades, and services driveway gates across Pasadena, from Bungalow Heaven to Hastings Ranch, and we handle everything from the first site walk to the final safety check. If you’re weighing a new gate or replacing an old one, call (626) 657-5425 and we’ll give you a written price before any work starts.
We’re a gate-specific company. That’s all we do. Our Gate Installation work covers swing gates, slide gates, and the motors that move them, which means we’re not a general contractor guessing at your gate’s tolerances. We’re the crew that knows what happens when a 400-pound steel gate meets Pasadena’s hard clay soil and a three-day Santa Ana wind event.
When You Need Driveway Gate
A driveway gate isn’t just about curb appeal. In Pasadena, where lots along Arroyo Boulevard back up to public trails and side-street driveways get foot traffic from local cut-throughs, a gate is often the first and last physical boundary between your family and anyone walking up your driveway. Here’s what pushes most Pasadena homeowners to call us:
- You have a long driveway that’s hard to see from the house. A steel or aluminum driveway gate with an intercom or camera gives you a control point before someone reaches your front door.
- Your old gate sags, scrapes, or won’t latch. Hinges wear out, posts shift in Pasadena’s expansive soil, and once a gate drags across the concrete, the motor starts working double duty. That’s when a replacement makes more sense than another patch.
- You’re tired of getting out of the car to open a manual gate. Adding a LiftMaster or FAAC gate motor turns a physical chore into a button press from your car or phone.
- Your existing gate motor is dead and the gate is stuck open. A stuck-open driveway gate is worse than no gate at all, because it gives the impression of an entrance without any of the control.
- You have a pool and the city or your insurance requires a self-closing, self-latching gate. Pasadena enforces strict pool barrier codes, and a properly installed driveway gate with the right closing mechanism can be part of that compliance picture.
- You’re planning a home renovation or landscape project. If you’re already trenching for electrical or redoing the driveway approach, that’s the cheapest moment to run conduit and set gate posts.
How Much Does a Driveway Gate Cost in Pasadena?
You should know the numbers before you make the first call. Here’s what we see across Pasadena, based on the actual gate systems we install and the site conditions we work with every week.
| Driveway Gate Item | Typical Pasadena Cost Range |
|---|---|
| Single swing gate (steel, 10 – 12 ft.) | $3,200 – $6,800 |
| Double swing gate (steel, 16 – 20 ft.) | $6,500 – $12,000 |
| Aluminum driveway gate (custom or semi-custom) | $4,000 – $9,500 |
| Gate motor replacement (LiftMaster, FAAC, BFT) | $950 – $2,400 installed |
| Full installation labor (posts, hanging, motor, wiring) | $1,800 – $4,500 |
| Intercom, keypad, or vehicle sensor add-on | $350 – $1,200 per device |
| Permit coordination and site prep | $250 – $700 |
What moves the price in Pasadena specifically? Three things. First, soil. Much of Pasadena sits on clay that expands when wet and contracts when dry, so gate posts need deeper footings than they would in, say, a coastal sand lot. That’s more concrete and more labor, and it’s why a $3,200 gate can still cost $6,500 installed. Second, driveway slope. If your driveway climbs, the gate needs to swing uphill or slide on a track that fights gravity. Motors get sized up, and swing direction matters. Third, access. Some Pasadena properties in the San Rafael Hills or along Linda Vista have narrow side access or retaining walls that make it harder to get equipment to the gate line.
We quote a written price before any work starts. Not an estimate range with fine print, not a “we’ll see once we open it up.” You’ll know the exact number, and the number doesn’t change at the end. Call (626) 657-5425 and we’ll schedule a site walk, measure your opening, check the existing electrical, and give you the final figure.
Our Driveway Gate Process
We’ve been doing this since home to Warden Gate Repair Pasadena has always meant gate work, and we’ve honed the process to keep you informed at every step. Here’s what happens when you call us about a driveway gate.
- You call and talk to a person. Not a voicemail. Not a chatbot. A live person answers 24/7 and takes down your address, your gate type, and what’s going on. We ask about the symptoms, not just the model number.
- We schedule the site visit and tell you who’s coming. Before the technician arrives, you get their name and photo sent to you. Every Warden technician is background-checked, identity-verified, and photo-badged under the Threshold Standard. When they ring your bell, they’ll show a photo ID badge at the door. You’ll already know what they look like.
- The technician measures and diagnoses on site. They’ll inspect the existing gate, the posts, the hinges, the motor (the box that slides or swings your gate automatically), the track if you have a slide gate, and the electrical feed. They’ll also check the driveway slope, soil condition around the posts, and clearance for swing arcs.
- You get a written price before any work begins. This is our rule, no exceptions. The price covers parts, labor, concrete work if needed, motor configuration, and safety devices. If we find something unexpected during the job, we stop and tell you before adding a dollar to the total.
- Installation day. We set posts to the depth Pasadena’s soil actually requires, hang the gate with an adjustable steel frame so it swings true, and wire the motor with dedicated conduit. We then run the full travel cycle at least a dozen times, set the force limits so the gate reverses on contact, and test the photo eyes and edge sensors.
- We walk you through the system and hand you the written guarantee. Every driveway gate installation and repair carries the 365-Day Done Right Promise. If anything isn’t right within a year, we come back and fix it free. You’ll have the promise in writing, including your second visit guarantee.
Gate Motors We Install and Service in Pasadena
The motor is the part that fails most often, and the part where compatibility matters most. We’re factory-trained on four of the brands we see on Pasadena driveway gates most: LiftMaster, FAAC, BFT, and Linear. That means we stock the right control boards, the right remotes, and the right limit-switch parts for those specific systems, and we don’t guess at wiring diagrams from a YouTube video. If you have an older FAAC swing arm or a Linear slide gate operator, we know the failure points and the replacement options.
Here’s a quick breakdown of what we typically recommend for Pasadena’s climate and driving patterns. For most single swing gates under 14 feet and 600 pounds, a LiftMaster LA500 or FAAC 400 series does the job reliably. For heavier steel gates or double swing setups, we recommend going up to a BFT Deimos or a Linear SLR slide operator, depending on your gate style. Pasadena’s heat in August and September exposes weak capacitors and over-spec’d motors that run too hot, so we size the motor to the gate’s actual weight and cycle count, not the brochure maximum.
FAQs – Driveway Gate
How long does driveway gate installation take in Pasadena?
Most single gate installations take one full day on site, from post setting to final programming. Double swing gates and slide gate systems on sloped driveways typically take two days. If we’re adding new conduit or running power to a gate that never had a motor, add a third day for trenching, which in Pasadena often means cutting through hard-packed clay or decomposed granite. We’ll give you a specific day count at the site walk, and the written price includes it.
Do I need a permit for a driveway gate in Pasadena?
Most driveway gate installations in Pasadena require a building permit, especially if the gate is motorized, exceeds 6 feet in height, or is within a front yard setback. Pasadena’s Planning and Community Development Department also reviews gate placement for traffic sight lines, which matters on properties near intersections or where the driveway meets a busy street. We handle permit coordination as part of the job, and the cost shows up as its own line item on your written price, so you’ll see exactly what the city charges. Call us at (626) 657-5425 if you’re not sure whether your project needs one, and we’ll check for you.
Is a steel or aluminum driveway gate better for Pasadena?
Steel is stronger and typically costs less upfront, but in Pasadena’s dry summers and occasional winter rains, steel needs proper powder coating or it rusts at the weld points within a few years. Aluminum won’t rust and works well for wider double gates because it’s lighter, which means a smaller motor and less stress on the hinge posts. For most Pasadena homeowners, we recommend aluminum when the driveway is wide or the budget allows it, and steel with a quality powder coat when strength and price are the priority.
Can you match an existing fence or gate style in Pasadena?
Yes, we work with local Pasadena metal fabricators to match existing designs offset by local fabricators. If you have a classic Spanish-style wrought iron gate in San Rafael, a mid-century modern steel gate in Linda Vista, or a custom redwood-and-steel combo in the Arroyo, we’ll match the material, the picket profile, and the finish. We also coordinate with your existing gate motor if you’re only replacing the gate leaf and keeping the operator.
What happens if my gate motor fails after installation?
The 365-Day Done Right Promise covers it. If any part of the installation or repair fails within one year, we return and fix it at no cost. The free second visit is included in every job, and you’ll have it in writing before we start. No service fee, no parts charge, no debate about whose fault it is. If the gate isn’t right, we make it right. That’s the whole promise.
Key Takeaways
- Driveway gate installation in Pasadena runs $4,800 to $14,500 for most complete systems, with a written price before we start.
- Pasadena’s clay soil and sloped driveways require deeper post footings and careful motor sizing, which we account for in every quote.
- You’ll know the technician’s name and see their photo before they arrive, and they’ll show a photo ID badge at the door under the Threshold Standard.
- Our 365-Day Done Right Promise covers every driveway gate job with a free return visit if anything fails within a year.
- Call (626) 657-5425 any time, day or night, and you’ll speak to a live person who can schedule your site walk.
Call Warden Gate Repair Pasadena for Your Driveway Gate
A driveway gate is a big piece of your home’s security and its first impression. It should be installed by people who do gates every day, who quote you a real price before touching the property, and who stand behind the work in writing. That’s us. Call (626) 657-5425 for a free estimate, and you’ll have a name, a photo, and a number before we ever swing a hammer.
Written by Cole Rafferty, Owner at Warden Gate Repair Pasadena, serving Pasadena.