Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFAAC Keypad & Intercom Repair: The Pasadena Owner’s Guide
FAAC keypad and intercom repair in Pasadena typically runs $165 to $425 installed, depending on whether we’re replacing the keypad face, the intercom module, or the full entry station. Most jobs are completed the same day since we keep FAAC-compatible keypads, intercom boards, and mounting hardware on the truck. The way most Pasadena owners discover the failure is unglamorous: the gate works fine from the remote inside the car, but the keypad outside either ignores every code, works only in a certain kind of weather, or sends the intercom into a low buzz that makes conversation impossible.
Cole Rafferty has seen the full spectrum, from keypads that plainly shorted out after a Santa Ana-driven dust spell to intercom units whose wiring was never sealed against the moisture that creeps up from sprinkler overspray along Altadena Drive and the Arroyo-adjacent blocks. If the buttons beep but the gate doesn’t move, or if the intercom rings but you can’t hear anyone, you’re usually looking at a specific, identifiable part failure, not a mystery.
Which FAAC Models This Applies To
We service keypads and intercom stations across the FAAC lines most common in Pasadena: the 400 and 412 operator series paired with DigiKey and DigiCode keypads, the XK and E024U/XK entry keypads, and the older 415/390 series gate entry panels that many homes in Chapman Woods and San Rafael still run. The compatibility gotcha with FAAC is voltage: older 390-series panels were built around 12V AC wiring, while the newer E024U boards expect 24V. A keypad that worked for fifteen years and suddenly won’t power up is often not the keypad itself but a transformer or board that’s no longer sending the voltage the keypad needs.
The model number on a FAAC keypad is printed on the back of the faceplate or on a small sticker inside the housing. When we quote a replacement over the phone, we ask for that number plus a photo of the wiring connections. On the OEM versus aftermarket question, we’re blunt: for FAAC keypads, the genuine FAAC part is almost always the right call because the housing dimensions and the mounting points are specific. Quality aftermarket equivalents exist for intercom modules and some wiring harnesses, but a no-name keypad that doesn’t seat flush against the gooseneck pedestal looks wrong and lets water in. We’ll show you both options with prices before you choose.
Styles & brands we work with





Signs Your FAAC Keypad & Intercom Repair Is Failing
- Buttons beep but the gate won’t open. The keypad is registering input, but the signal isn’t reaching the operator board. Usually a wiring fault at the terminal block or a relay that’s worn out, both repairable without replacing the whole keypad.
- The keypad works in the morning, not the afternoon. Thermal expansion on the keypad’s circuit board or a solder joint that opens when the direct sun hits the housing. Common on south-facing entry stations in Pasadena, where summer surface temperatures climb past 140 degrees.
- The intercom buzzes constantly or picks up static instead of voices. A failing audio module or a ground loop from corroded wiring. We check the shielding before we sell you a new intercom, because a $12 repair is frustrating to turn into a $300 replacement.
- Some keys don’t respond, or the code works intermittently. The membrane or the individual switches beneath the keys are degrading. Water intrusion accelerates this; a keypad that’s never been resealed after a few Pasadena rainy seasons is a prime candidate.
- You hear a faint click but no movement at the operator. The keypad is sending signal, but the operator’s receiver or the wiring between the two has failed. We trace the run before assuming the keypad is at fault.
Replacement Cost & What’s Included
Installed FAAC keypad and intercom repair in Pasadena breaks down roughly like this, written out so you know what to expect before we arrive:
- Keypad faceplate or membrane replacement: $165 – $245 installed, including the new keypad overlay, resealing the housing, and testing the full range at the gate.
- Intercom audio module replacement: $185 – $285 installed, depending on whether we’re swapping the speaker, the mic, or the board, with wiring re-terminated cleanly.
- Full entry station replacement (keypad + intercom + housing): $350 – $425 installed, including the new station, weather sealing, and pairing to your existing FAAC operator.
The range exists because wiring age and access differ house to house, not because we pad the number after we start. The written price we give you before any work starts is the price you pay. Every repair carries the 365-Day Done Right Promise: if the same part fails within a year, we come back and make it right with a free return visit.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
SAFETY FIRST: FAAC keypads and intercom stations run on low-voltage control wiring, generally 12V or 24V AC, which is not a shock hazard in the way line voltage is. But the operator itself is a different story. If you’re checking wiring connections inside the operator cabinet while the gate is moving or under load, you can be seriously injured. No keypad or intercom repair is worth working on a gate that isn’t fully disconnected and mechanically locked out.
What you can safely check yourself: whether the keypad has power (any beep or backlight means yes), whether the intercom wiring at the station is visibly chewed or corroded, and whether the keypad housing is cracked or showing daylight. Those observations help us diagnose faster over the phone. What we’d rather you not do is open the sealed keypad body and start probing contacts; you’ll compromise the weather seal and likely turn a $200 repair into a $400 replacement. Call (626) 657-5425 and tell us what it’s doing wrong. Cole’s rule applies here: “Tell me what it’s doing wrong, and I’ll tell you exactly what it costs to fix it – before I touch a thing.”
FAQs
A properly sealed FAAC keypad should give you 8 to 12 years in Pasadena, but unshaded south-facing units and stations near lawn sprinklers often fail at 5 to 7 years because heat and moisture are the two things that kill keypad membranes and intercom boards fastest. Call (626) 657-5425 if yours is acting up; we’ll tell you whether it’s worth repairing or replacing.
Yes, and often it should be. Wiring faults, corroded terminals, dead relays, and worn key switches are all repairable on-site for less than the cost of a full keypad replacement. We’ll only recommend replacement when the housing is cracked, the board is water-damaged, or the membrane is beyond resealing.
Most single-station swaps take 45 to 90 minutes on-site, including the removal of the old unit, re-terminating the wiring, sealing the new housing against Pasadena’s sun and rain, and testing every code from both sides of the gate. You’ll be back to a working entry system the same day.
We stock FAAC DigiKey, DigiCode, and XK series keypads, plus intercom modules and the wiring harnesses that go with them, on our service vehicles. We also carry compatible LiftMaster, Mighty Mule, and Ghost Controls parts in the event your whole entry system needs attention beyond the FAAC component. When you call, we’ll confirm the exact part you need before we dispatch, so the trip isn’t wasted.
Pasadena FAAC Keypad & Intercom Repair You Can Actually Trust
Every Warden Gate Repair Pasadena technician is background-checked, identity-verified, and photo-badged. Before we arrive, you’ll get the tech’s name and photo by text. At your door, they’ll show the badge. That’s the Threshold Standard, and we don’t make exceptions, because opening your door to a stranger is a real decision and you deserve to know exactly who’s coming. We’re an independent service provider; we’re not affiliated with FAAC, but we’ve worked on their equipment for years and know the quirks of every model line that’s popular in Pasadena.
If your FAAC keypad is dead, your intercom is buzzing, or the code that worked last week doesn’t work today, call (626) 657-5425. Live person, 24/7, no chatbot. We’ll quote the repair in plain English, in writing, before any work begins. And if it’s not right, we’ll be back, free, until it is.
Written by Cole Rafferty, Owner, Warden Gate Repair Pasadena at Warden Gate Repair Pasadena, serving Pasadena and nearby areas.